71
Resetting the Trip computer
1.
"Vehicle Info"
2.
"Trip computer"
3.
Select
>
"Reset" all values are reset
>
"Automatically reset" all values are reset
approx. 4 hours after the engine is
switched off
Settings and information
Operating principle
1
Button for:
>
Selecting display
>
Setting values
2
Button for:
>
Confirming selected display or set val-
ues
>
Calling up computer information
3
When the lights are on: instrument lighting
brightness
4
Calling up Check Control
5
Setting the time
6
Setting the date
7
Viewing service requirement display
8
Switching Shift Lights
*
on/off
Exiting displays
The outside-temperature reading and the time
reappear when you press button
2
or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Units of measure
Setting the units of measure
You can change the units for fuel consumption,
route/distance, temperature and pressure.
iDrive, for operating principle refer to page
ba8_E9293M3_cic.book Seite 71 Dienstag, 19. August 2008 12:01 12
Online Edition for Part no. 01 41 2 600 999 - © 08/08 BMW AG