77
3.
"Check Control"
4.
Select the text message.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph or 5 km/h.
Displaying, setting or changing the
limit
iDrive, for operating principle refer to page
.
1.
"Settings"
2.
"Limit"
3.
"Limit:"
4.
Turn the controller until the desired limit is
displayed.
5.
Press the controller.
The speed limit is stored.
Applying your current speed as the
limit
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Limit"
3.
"Select current speed"
4.
Press the controller.
The system adopts your current speed as the
limit.
Activating/deactivating the limit
iDrive, for operating principle refer to page
1.
"Settings"
2.
"Limit"
3.
"Limit warning"
4.
Press the controller.
The limit warning is switched on.
ba8_E9091_cic.book Seite 77 Mittwoch, 29. Oktober 2008 2:59 14
Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG
