Adjustments
44
triggering of the active head restraints, have the
testing, repair and removal executed only by a
BMW center or a workshop that works accord-
ing to repair procedures of BMW with corre-
spondingly trained personnel and that has the
required explosives licenses. Unprofessional
attempts to work on the system could lead to
failure in an emergency or to undesired airbag
activation, either of which could result in per-
sonal injury.
<
For technical reasons, the head restraint
cannot be removed.
<
Front seats
Height adjustment
>
To raise: pull up.
>
To lower: press the button, arrow
1
, and
slide the head restraint down.
Rear seats
Height adjustment
>
To raise: pull up.
>
To lower: press the button, arrow
1
, and
slide the head restraint down.
The center head restraint is not height-adjust-
able.
Removing
Sedan:
Only with through-loading system:
1.
Pull up as far as it will go.
2.
Press the button, arrow
1
, tilt the rear seat
backrest slightly forward and pull the head
restraint all the way out.
Only remove the head restraints if no pas-
sengers will be sitting in the rear. Reinstall
head restraints before transporting passengers
in the rear.
<
Folding head restraints down and back
up
Folding down:
Press the button, arrow
1
.
Folding up:
Pull the head restraint.
Depending on the equipment version, it may be
possible to fold down the outer rear head
restraints as well.
Only fold the head restraints down if no
passengers will be sitting in the rear. Fold
up the head restraints before transporting pas-
sengers in the rear.
<
ba8_E9091_cic.book Seite 44 Mittwoch, 29. Oktober 2008 2:59 14
Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG