BMW 2008 M3 Owner'S Manual Download Page 104

Page: 104 / 276

102

Push button

up or down to select the

desired brightness level.

Press button

The display again shows the outside tem-
perature and the time.

Interior lamps

The interior lamps, footwell lamps

, entry

lamps

, cargo bay lamp and courtesy lamps

are controlled automatically.
The LEDs for the courtesy lamps

are set in the

door handles and illuminate the ground in front
of the doors.

To avoid draining the battery, all lamps
inside the car are switched off about

8 minutes after the ignition is switched off, refer
to Start/stop button on page

Switching interior lamps on/off
manually

Interior lamps, front and rear

To switch on and off, press the button.
To switch off the interior lamps, footwell
lamps

, entry lamps

and courtesy lamps

per-

manently, press the button for the front interior
lamps for about 3 seconds.

Reading lamps

There are reading lamps at the front and rear

next to the interior lamps. To switch on and off,
press the button.

Online Edition for Part no. 01 41 0 014 962 - © 02/08 BMW AG

Summary of Contents for 2008 M3





















































































































































































































































































Search results

Summary of Contents for 2008 M3

Reviews:

Related manuals for 2008 M3

Brands by name

Popular brands

BMW 2008 M3, Owner'S Manual

Search results

Summary of Contents for 2008 M3

Reviews:

Related manuals for 2008 M3

Brands by name

Popular brands