BMW 2007 X5 3.0d Owner'S Handbook Manual Download Page 77

Page: 77 / 273

Settings on the control

display

iDrive, principle, see page

Press the

button once or twice until

the start menu is displayed.

Press the controller to call up the menu.

Turn the controller until "Settings" is
selected and press the controller.

Setting time

Turn the controller until "Clock / Date" is
selected and press the controller.

You may need to move the controller for-
ward once to switch to the first field from
the top.

Turn the controller until "Clock" is selected
and press the controller.

Turn the controller until "Set time" is
selected and press the controller.

Adjusting settings

Turn the controller to set the hour and press
the controller.

Turn the controller to set the minutes and
press the controller.

The system accepts the new time.

Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG

Summary of Contents for 2007 X5 3.0d


















































































































































































































































































Search results

Summary of Contents for 2007 X5 3.0d

Reviews:

Related manuals for 2007 X5 3.0d

Brands by name

Popular brands

BMW 2007 X5 3.0d, Owner'S Handbook Manual

Search results

Summary of Contents for 2007 X5 3.0d

Reviews:

Related manuals for 2007 X5 3.0d

Brands by name

Popular brands