BMW 2007 X5 3.0d Owner'S Handbook Manual Download Page 183

Page: 183 / 273

181

To exit the menu:
Select the

arrow and press the controller.

In vehicles equipped with two CD drives, you
can store a particular track on the favourites/
programmable memory buttons, see page

Displaying information on the track

With compressed audio files, you can have any
saved information about the current track dis-
played, e.g. the name of the artist.

Press the controller.

Select "Details" and press the controller.

The information is shown for the current track.
The setting is saved for the remote control cur-
rently in use.

Sampling tracks, Scan

All tracks on the current CD are automatically
sampled once in succession.

Select "Set" and press the controller.
Further menu items are displayed.

Select "Scan" and press the controller.

To stop sampling:

Press the controller.

Select "Scan" and press the controller.

Track sampling is interrupted and the selected
track is retained.

Compressed audio files

Select current track and press the control-
ler.

Select the desired menu item:

To sample all the tracks in the current
directory, select "Scan directory" and
press the controller.

To sample all the tracks on the CD,
select "Scan all" and press the control-
ler.

To stop sampling:

Press the controller.

Select "Scan directory" or "Scan all" and
press the controller.

Sampling is interrupted and the selected track
is retained.

Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG

Summary of Contents for 2007 X5 3.0d


















































































































































































































































































Search results

Summary of Contents for 2007 X5 3.0d

Reviews:

Brands by name

Popular brands

BMW 2007 X5 3.0d, Owner'S Handbook Manual

Search results

Summary of Contents for 2007 X5 3.0d

Reviews:

Brands by name

Popular brands