manualshive.com logo in svg

BMW 2007 X5 3.0d, Owner'S Handbook Manual, Page: 158 / 273

Share
Download
BMW 2007 X5 3.0d Owner'S Handbook Manual Download Page 158

Route guidance

156

3.

Turn the controller until "Settings" is 
selected and press the controller.

4.

Turn the controller until "Traffic information 
settings" is selected and press the control-
ler.

5.

If necessary, move the highlighted marker 
to the uppermost field. Turn the controller 
until "Traffic information" is selected and 
press the controller.

6.

Select "TMC" and press the controller.

 Traffic information can be received and dis-

played.

Selecting TMC stations

1.

Press the 

 button.

The start menu is called up.

2.

Press the controller to call up the   menu.

3.

Turn the controller until "Settings" is 
selected and press the controller.

4.

Turn the controller until "Traffic information 
settings" is selected and press the control-
ler.

5.

If necessary, move the highlighted marker 
to the uppermost field. Turn the controller 
until "Traffic information" is selected and 
press the controller. 

6.

Select a TMC station and press the control-
ler.
"AUTO": automatic selection of the TMC 
station with the strongest received signal.

   Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG

Summary of Contents for 2007 X5 3.0d


















































































































































































































































































Reviews:

No comments