BMW 2007 X5 3.0d, Owner'S Handbook Manual

Page: 107 / 273

105
En
te
rt
a
in
m
e
n
t
Overvi
ew
Co
n
tr
o
ls
D
riv
in
g
h
in
ts
Na
v
iga
ti
on
Mo
bil
it
y
Re
fe
re
n
c
e
Selecting program
Press the button as often as nec-
essary until the desired program is
shown on the control display.
Adjusting air distribution individually –
individual program
The settings are memorised in this program.
iDrive, principle, see page
14 .
1. Press the button.
The start menu is called up.
2. Move the controller to the left to call up "Cli-
mate".
3. Select "Air distribution" and press the con-
troller.
Settings for the driver's and front passen-
ger's side can be made separately via the
field on the right-hand or left-hand side.
4. Select driver's or front passenger's side as
appropriate.
Move the controller repeatedly to the right
or left to select the driver's or front passen-
ger's side.
5. Move the controller to select the required
field.
6. Turn the controller to adapt the air distribu-
tion.
Driver's side:
1 Air to windscreen and side windows
2 Air to the upper body area
3 Air to footwells
Front passenger's side:
4 Air to the upper body area
5 Air to footwells
Pressing the AUTO button cancels the
manual air distribution settings.
<
The air volume continues to be regulated auto-
matically when the air distribution is adjusted
manually.
Switching cooling function on and off
Air is cooled and dried when the
cooling function is switched on,
then reheated to suit the tempera-
ture setting. Depending on weather conditions,
the windscreen may fog over momentarily
when the engine is started.
The cooling function is switched on automati-
cally in the AUTO program. The interior can
only be cooled when the engine is running.
Maximum cooling effect
At outside temperatures above
approx. 0
6 /32 7 and when the
engine is running, you will obtain a
maximum cooling effect as soon as
possible.
The automatic air conditioning enters the recir-
culated-air mode at the lowest temperature
possible. Air flows at maximum rate from the
outlets for the upper body area. You should
therefore open these outlets for maximum cool-
ing.
Automatic Air Recirculation Control
AUC/recirculated-air mode
If the air outside the car has an
unpleasant odour or contains pol-
lutants, the supply to the interior of
the car can be shut off. The air
inside the car is then recirculated. In AUC mode,
a sensor detects pollutants in the outside air
and shuts it out automatically.
Three operating modes can be obtained in suc-
cession by pressing this button repeatedly:
> LED off: ambient air is constantly entering
the car.
> Left-hand LED on, AUC mode: the system
will identify pollutants in the ambient air and
shut off the ambient air supply if necessary.
Online Edition for Part-No. 01 41 0 013 209 - © 04/07 BMW AG