BMW 2007 M6 Owner'S Manual Download Page 81

Page: 81 / 270

Setting time

Turn the controller until "Time / Date" is
selected and press the controller.

Move the controller forward once if neces-
sary to change to the first field from the top.

Turn the controller until "Time" is selected
and press the controller.

Turn the controller until "Set time" is
selected and press the controller.

Making settings

Turn the controller to set the hours and
press the controller.

Turn the controller to set the minutes and
press the controller.

The changed time is stored.

Switching on hour signal*

You will hear three tones just before the top of
each hour.
Select "Hour memo" and press the controller.

The hour signal is activated.

The setting is stored for the remote control cur-
rently in use.

Setting 12h/24h format

Select "Time format" and press the control-
ler.

Select the desired format and press the
controller.

The setting is stored for the remote control cur-
rently in use.

Setting date

Select "Date" and press the controller.

Select "Set date" and press the controller.
The first setting of the date display is
selected.

Turn the controller to make the adjustment.

Press the controller to apply the setting.
The next setting is selected.

Make the remaining adjustments. After the
last adjustment, the date is stored.

Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG

Summary of Contents for 2007 M6















































































































































































































































































Search results

Summary of Contents for 2007 M6

Reviews:

Related manuals for 2007 M6

Brands by name

Popular brands

BMW 2007 M6, Owner'S Manual

Search results

Summary of Contents for 2007 M6

Reviews:

Related manuals for 2007 M6

Brands by name

Popular brands