BMW 2006 M5 Owner'S Manual Download

Page: 36 / 231

Opening and

closing

The handle recesses on the interior trim of the
luggage compartment lid make it easier to pull
down.

Emergency release

Pull lever in luggage compartment. The lug-
gage compartment lid is unlocked.

Manual release

If an electrical malfunction should occur, you
can unlock the luggage compartment lid manu-
ally.

Grasp the rear seat

at the front edge and

remove from the mounts

. Take out the

rear seat.

Pull the ring. The luggage compartment lid
is unlocked and opens.

Only grasp the emergency release by
the ring, otherwise injuries can

occur.

Reinstalling rear seat:

Position the rear seat in the vehicle. Guide
the two outer belt buckles

through the

seat bench and slide the seat bench com-
pletely under the backrest. The middle belt
buckle

must be guided between the seat

bench and the backrest when doing so.

Do not twist the center belt buckle, as
otherwise correct operation of this

safety equipment is not ensured.

Press the rear seat downward into the
mounts at the front until it audibly engages.

Alarm system

The concept

The vehicle alarm system responds:

When a door, the hood, or the luggage com-
partment lid is opened

To movements in the vehicle: interior
motion sensor, refer to page

Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG

Summary of Contents for 2006 M5








































































































































































































































Search results

Summary of Contents for 2006 M5

Reviews:

Related manuals for 2006 M5

Brands by name

Popular brands

BMW 2006 M5, Owner'S Manual

Search results

Summary of Contents for 2006 M5

Reviews:

Related manuals for 2006 M5

Brands by name

Popular brands