BMW 2006 M5 Owner'S Manual Download

Page: 136 / 231

d t

134

Move the controller to the left or right to
select "Treble" or "Bass".

Turn the controller until the desired setting
is selected.

Balance and fader

You can adjust the volume distribution in the
same manner as "Treble / Bass".

"Balance": left/right volume distribution

"Fader": front/rear volume distribution

Speed-dependent volume control

The speed-dependent volume control auto-
matically increases the volume with increasing
speed. You can set various stages for the
increase in volume.

Select "Speed volume" and press the con-
troller.

Turn the controller:
The adjustment is applied; the field can be
changed.

Professional LOGIC7 HiFi System*

You can select a spatial sound effect that
improves the spatial acoustics in all frequency
ranges.

Select "Surround Settings" and press the
controller.

Select "Concert hall" or "Theater".

Press the controller.
LOGIC7 spatial sound is switched on.

To cancel the stereo effect:
Select "Off" and press the controller.
LOGIC7 and the LOGIC7 logo are registered
trade marks of Lexicon, Inc., a company of the
Harman International Group.

Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG

Summary of Contents for 2006 M5








































































































































































































































Search results

Summary of Contents for 2006 M5

Reviews:

Related manuals for 2006 M5

Brands by name

Popular brands

BMW 2006 M5, Owner'S Manual

Search results

Summary of Contents for 2006 M5

Reviews:

Related manuals for 2006 M5

Brands by name

Popular brands