manualshive.com logo in svg

BMW 2004 M3, Owner'S Manual, Page: 123 / 170

Share
Download
BMW 2004 M3 Owner'S Manual Download Page 123

123

Adding engine oil

Only add engine oil when the oil level 
has dropped to just above the lower 
mark on the dipstick.

Do not fill beyond the upper mark on 
the dipstick. Excess oil will damage the 
engine.

Before checking the engine oil level 
after topping up, restart the engine and 
allow it to run to obtain a correct dis-
play. Then proceed as described under 
Checking the oil level.

Continuous exposure to used oil 
has caused cancer in laboratory 

testing. For this reason, thoroughly 
wash any areas of skin that come into 
contact with oil using soap and water.
Store oils, grease and similar materials 
so that they are inaccessible to chil-
dren. Comply with warning labels and 
information on containers.

<

Comply with the applicable envi-
ronmental laws regulating the dis-

posal of used oil.

<

Recommendation: have the oil changed 
at your BMW center.

Specified engine oils

The quality of the engine oil is 
extremely important for the function 
and life of an engine. Based on exten-
sive testing, BMW has approved only 
certain grades of engine oil.

Use only oils approved for your vehicle 
model.

Ask your BMW center for details 
concerning oils that have been 

approved. You can also call BMW of 
North America toll-free at 1-800-831-
1117 or visit this website: 
www.bmwusa.com to obtain this infor-
mation.

<

BMW engines are designed to 
operate without oil additives; the 

use of additives could even lead to 
damage in some cases.

<

Alternative oil types

If a High Performance Synthetic Oil 
approved by BMW should be unavail-
able, you may use small volumes of 
other oils for topping up between oil 
changes. The following data must 
appear on the packaging:

>

Viscosity
preferred: SAE 10W-60
alternative: SAE 5W-40 or  
SAE 10W-40

>

Specifications
preferred: API SJ/CF
alternative: API SJ – also SK, SL, S 
etc.

Engine oil

Overview

Controls

Maintenance

Repairs

Data

Index

Online Edition for Part-No. 01 41 0 158 512 - © 09/04 BMW AG

Summary of Contents for 2004 M3











































































































































































Reviews:

No comments