manualshive.com logo in svg

BMW 2 COUPE 2023 Series, Owner'S Manual

The BMW 2 COUPE 2023 Series Owner's Manual is a comprehensive guide that provides essential information about operating and maintaining your vehicle. With this manual, you can easily access valuable insights and instructions on various features. Download this manual for free at manualshive.com, ensuring you have all the necessary information at your fingertips.

Share
Download
background image

System limits

System limits of the sensors

Additional information:

▷

Camera, refer to page 

35

.

Functional limitations

The system function may be limited and may

provide incorrect information in the following

situations:

▷

Traffic signs are fully or partially concealed

by objects, stickers, or paint.

▷

Traffic signs do not comply with the stand-

ard.

▷

In areas that are not included in the naviga-

tion system map data.

▷

If navigation system map data is invalid,

outdated, or unavailable.

▷

When roads deviate from the navigation,

such as due to changes in road layout.

▷

When driving very close to the vehicle in

front of you.

▷

When passing buses or trucks with traffic

signs applied to them.

▷

In case of electronic traffic signs.

▷

When traffic signs that are valid for a paral-

lel road are detected.

▷

In the presence of country-specific road

signs or road layouts.

Manual Speed Limiter

Principle

The Manual Speed Limiter can be used to set

a speed limit, for instance to prevent the vehi-

cle from exceeding speed limits.

General information

The system can limit the speed, starting at

20 mph/30 km/h. The vehicle can be driven

at any speed below the set speed limit.

Overview

Buttons on the steering wheel

Button Function

System on/off.

Store current speed.
Speed Limit Assistant: accept sug-

gested speed manually.

Rocker switch:
Changing the speed limit.

Operation

Turning on the speed limiter

Press the button on the steering wheel.

The current speed is accepted as the speed

limit.
If the system is turned on while the vehi-

cle is stationary or driving at low speeds,

20 mph/30 km/h is set as the speed limit.
The marking in the speedometer is set to the

corresponding speed.
When the speed limit is activated, Dynamic

Stability Control is switched on and the vehicle

may change to COMFORT drive mode.

Turning off the speed limiter

Press the button on the steering wheel.

Seite 183

Driver assistance systems

CONTROLS

183

Online Edition for Part no. 01405A5E788 - VI/22

Summary of Contents for 2 COUPE 2023 Series





















































































































































































































































































































































Reviews:

No comments

Related manuals for 2 COUPE 2023 Series

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
AAMP of America iSimple Operation Manual preview
iSimple
Brand: AAMP of America Pages: 6
Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
Hyundai Santa Fe 2019 Getting Started Manual preview
Santa Fe 2019
Brand: Hyundai Pages: 18
Draw tite 24963 Installation Instructions preview
24963
Brand: Draw tite Pages: 4
EFILive CM2350B User Manual preview
CM2350B
Brand: EFILive Pages: 25
ULTIMATE SPEED UAWSO 2 B1 Operation And Safety Notes preview
UAWSO 2 B1
Brand: ULTIMATE SPEED Pages: 32
Chevrolet 1998 Tahoe Manual preview
1998 Tahoe
Brand: Chevrolet Pages: 441
Saab 32 025 603 Installation Instructions Manual preview
32 025 603
Brand: Saab Pages: 15
Mazda 0000-8L-G03A Installation Instructions preview
0000-8L-G03A
Brand: Mazda Pages: 3
ORA XL MIRROR Installation Instructions Manual preview
XL MIRROR
Brand: ORA Pages: 7
V8 equipment E.BEX Manual preview
E.BEX
Brand: V8 equipment Pages: 34
Whispbar K482W Fitting Instructions Manual preview
K482W
Brand: Whispbar Pages: 14
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
ZENEC ZE-RVC85WA Mounting Instructions preview
ZE-RVC85WA
Brand: ZENEC Pages: 2
Chrysler Sebring Convertible Owner'S Manual preview
Sebring Convertible
Brand: Chrysler Pages: 454
Metra Electronics 99-7804 Installation Instructions Manual preview
99-7804
Brand: Metra Electronics Pages: 10
Buick Enclave Owner'S Manual preview
Enclave
Brand: Buick Pages: 394

Brands by name

Popular brands

Load more brands