Controls overview
80
2.
Press button
2
.
"CHECK OK" appears if there are no Check
Control messages. If a Check Control mes-
sage has been stored, the corresponding
lamp lights up. It is accompanied by a text
message on the Control Display.
3.
Push button
1
to check for other messages.
4.
Press button
2
.
The display again shows the outside tem-
perature and the time.
Via iDrive
1.
"Vehicle Info"
2.
"Vehicle status"
3.
"Check Control"
4.
Select the text message.
Speed limit
You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 5 km/h.
Displaying, setting or changing the
limit
1.
"Settings"
2.
"Speed"
3.
"Warning at:"
4.
Turn the controller until the desired speed
is displayed.
5.
Press the controller.
The speed limit is stored.
Applying your current speed as the
limit
1.
"Settings"
2.
"Speed"
3.
"Select current speed"
The system adopts your current speed as the
limit.
Activating/deactivating the limit
1.
"Settings"
2.
"Speed"
3.
"Warning"
Online Edition for Part no. 01 40 2 606 818 - © 03/11 BMW AG
Online Edition for Part no. 01 40 2 606 818 - © 03/11 BMW AG
Summary of Contents for 128I
