BMW Motorrad S 1000XR 2020, Rider'S Manual, Page: 70 / 259

DTC indicator and warning
light remains illuminated.
The DTC function is switched
off.
Switching on DTC
Press and hold button 1
until the DTC indicator light
changes its behavior.
Immediately after pressing but-
ton
1 , the DTC system status
ON
is displayed.
DTC indicator and warning
light goes out and begins
to flash if self-diagnosis has not
been completed.
Possible DTC system status
ON
is displayed.
Release button 1 after
changeover of the status.
DTC indicator and warning
light remains off or contin-
ues to flash.
The new DTC system status
ON
is displayed for a short time.
The DTC function is switched
on.
As an alternative, the ignition
can also be switched off and
then on again in the Rain,
ROAD and DYNAMIC riding
modes.In the DYNAMIC PRO
riding mode, the most recently
selected DTC status is retained
after turning on the ignition
again.
If the DTC indicator light
lights up after switch-
ing the ignition off and on and
then continuing to ride at the
following minimum speed, a
DTC fault has occurred.
min 3 mph (min 5 km/h)
More detailed information on
the Dynamic Traction Control
can be found in the chapter
"Technology in detail":
How does traction control
work? (
135)
Electronic chassis and
suspension adjustment
(D-ESA)
Dynamic ESA adjustment
options
The electronic Dynamic ESA
chassis and suspension adjust-
ment can adapt your motorcycle
to the load.
4
68
z Operation