BMW Motorrad S 1000XR 2020, Rider'S Manual, Page: 166 / 259

Remove screw 1 and detach
brake line from bracket 2 .
Make sure that the wheel
speed sensor
1 is not
damaged when rolling out the
rear wheel.
Roll rear wheel toward rear out
of swinging arm while pulling
brake caliper carrier
1 toward
rear until rear-wheel rim can be
guided past it.
NOTICE
The camshaft sprocket and the
spacing bushings on the left and
right are loosely inserted in the
wheel. During removal, make
sure that the parts are not dam-
aged or lost.
Installing the rear wheel
ATTENTION
Altering the tire size
Influence on the control systems
Have new parameters encoded
by a specialist workshop,
preferably by an authorized
BMW Motorrad retailer.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Roll rear wheel on support into
swinging arm until brake-caliper
support can be installed.
9
164
z Maintenance