BMW Motorrad S 1000RR 2013, Rider'S Manual

Page: 47 / 200

NOTICE
You have the option of deactiv-
ating the DTC function while the
motorcycle is on the move.
Press and hold down button 1
until DTC indicator light 3
changes status.
DTC indicator light starts to
show.
Release button 1 within two
seconds.
DTC indicator light remains
on.
The DTC function is deactiv-
ated.
Activating the DTC
function
Press and hold down button 1
until DTC indicator light 3
changes status.
DTC indicator light goes
out; if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
DTC indicator light remains
off or continues to flash.
The DTC function is activated.
If the coding plug for the
SLICK function is not inserted,
you have the option of
switching the ignition off and
then on again.
NOTICE
A DTC fault has occurred if the
DTC indicator light shows when
the motorcycle accelerates to a
speed in excess of 5 km/h after
the ignition was switched off and
then on again.
Riding mode
Setting riding mode
Switch on the ignition.
4
45
z Operation