BMW Motorrad S 1000RR 2013, Rider'S Manual

Page: 143 / 200

Roll the rear wheel to the rear
and clear of the swinging arm
and at the same time pull
brake-caliper carrier
10 back
far enough to allow the rear
wheel to clear it.
NOTICE
The sprocket and the spacer
sleeves on left and right are
loose fits in the wheel. Take care
when removing to ensure that no
parts are damaged or mislaid.
Install the rear wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and DTC.
See the information on the ef-
fect of wheel size on the ABS
and DTC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
Always have the security of
the fasteners checked by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Roll the rear wheel on the sup-
port into the swinging arm as
far as necessary to permit the
brake-caliper carrier to be in-
serted.
Insert the brake-caliper carrier
into the guide
11 .
9
141
z Maintenance