BMW Motorrad S 1000RR 2013, Rider'S Manual

Page: 139 / 200

Force brake pads 3 slightly
apart by rocking brake caliper 4
back and forth against brake
disc
5 .
Carefully pull the brake calipers
back and out until clear of the
brake discs.
Place the motorcycle
on an auxiliary stand;
BMW Motorrad recommends
the BMW Motorrad rear-wheel
stand.
Install the auxiliary stand at rear
wheel (
145).
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Installing auxiliary stand at front
wheel (
143).
ATTENTION
Incorrectly aligned threaded
bush in front suspension.
Damage to wheel speed sensor.
ABS malfunction.
Left axle clamping screws
locate the threaded bush; do
not loosen or remove these
screws.
Slacken right axle clamping
screws
1 .
Remove quick-release axle 2 ,
while supporting the wheel.
Roll the front wheel forward to
remove.
Installing front wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS
and DTC.
See the information on the ef-
fect of wheel size on the ABS
and DTC systems at the start
of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque.
Damage, or threaded fasteners
work loose.
9
137
z Maintenance