BMW Motorrad S 1000 RR, Rider'S Manual

Page: 81 / 320

75
FRONT AND REAR SEATS
Removing tail-hump cover
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use ignition key 1 to unlock
lock for tail-hump cover 2 .
Remove tail-hump cover 2 ; to
do so, unhook fixing 3 .
Installing tail-hump cover
Position tail-hump cover 1 ;
hook in fixing 2 while doing
so.
Press tail-hump cover 1
downwards and lock.
Removing passenger seat
with two-up riding package OE
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Use ignition key 1 to unlock
lock for passenger seat 2 .
Remove passenger seat 2 ; to
do so, unhook fixing 3 .
Remove the ignition key from
the lock and place the pas-
senger seat, upholstered side
down, on a clean surface.
Installing passenger seat
with two-up riding package
OE