BMW Motorrad S 1000 RR, Rider'S Manual

Page: 77 / 320

71
ating the handbrake or foot-
brake lever.
If the brake is actuated for
approximately one second
after the vehicle has come to
a standstill and the motor-
cycle is on a gradient of at
least 3%, Hill Start Control
Pro is automatically activated.
The selected setting remains
stored even after the ignition
is switched off.
SHIFT LIGHT
Switching gearshift light on
and off
Navigate to
Settings
,
Vehicle settings
.
Switch
Shift light
on or
off.
Setting upshift indicator
Switch on the
Shift light
function.
Go to the
Settings
,
Vehicle settings
,
Configuration
menu
(under
Shift light
).
The following settings are
available:
Start RPM
End RPM
Brightness
Frequency
. A flashing fre-
quency of 0 Hz corresponds
to steady light.
Changes to brightness and
the flashing frequency are
demonstrated by the shift
light with it briefly lighting up
or flashing.
ANTI-THEFT ALARM (DWA)
with anti-theft alarm (DWA) OE
Activation
Switch on the ignition ( 56).
Customising anti-theft alarm
settings ( 72).
Switch off the ignition.
If the alarm system is activ-
ated, then the alarm system
will be automatically activated
when the ignition is switched
off.
Activation takes approximately
30 seconds to complete.
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.