BMW Motorrad S 1000 R, Rider'S Manual

Page: 85 / 172

Needle 3 of the revolution
counter moves all the way to the
position for maximum engine
revolutions.
All the segments in the display
light up.
Phase 2
The 'General' warning light
changes from yellow to red.
Phase 3
The needle of the revolution
counter moves to the position
for zero engine revolutions.
The telltale and warning lights go
out.
The display switches to its ordin-
ary display mode.
If a warning light does not show:
Some malfunctions cannot
be indicated if one of the
warning lights fails to show.
Make sure that all the warning
and telltale lights come on in the
pre-ride check.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
BMW Motorrad Race ABS per-
forms self-diagnosis to ensure its
operability. Self-diagnosis is per-
formed automatically when you
switch on the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
ABS warning light flashes.
Phase 2
Pullaway test of the system
components with diagnostic
capability.
ABS warning light flashes.
ABS self-diagnosis
completed
The ABS symbol no longer
shows.
Check all the warning and tell-
tale lights.
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
If an indicator showing an ABS
fault appears when ABS self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the ABS function
and the integral braking func-
6
83
z Riding
ProCarManuals.com