BMW Motorrad S 1000 R, Rider'S Manual

Page: 46 / 172

Press and hold down button 1
until first DTC warning light 2
and then ABS warning light 3
change their status.
The DTC setting remains un-
changed.
ABS warning light flashes.
Release button 1 within two
seconds.
ABS warning light contin-
ues to flash.
ABS function is switched off.
Switch on the ABS
function
Press and hold down button 1
until ABS warning light 2
changes status.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
ABS warning light remains
off or continues to flash.
ABS function is switched on.
If the coding plug is not inser-
ted, you have the alternative of
switching the ignition off and
then on again.
An ABS fault has
occurred if the ABS
warning light shows when
the motorcycle accelerates
to a speed in excess of the
minimum stated below after
the ignition was switched off
and then on again.
min 5 km/h
BMW Motorrad ASC
Switch off the ASC
function
Start the engine.
You have the option of de-
activating the ASC function
while the motorcycle is on the
move.
4
44
z Operation
ProCarManuals.com