BMW Motorrad S 1000 R, Rider'S Manual

Page: 87 / 172

Phase 1
Test of the diagnosis-compat-
ible system components with
the vehicle at a standstill.
DTC warning light slow-
flashes.
Phase 2
Pullaway test of the system
components with diagnostic
capability.
DTC warning light slow-
flashes.
DTC self-diagnosis
completed
The DTC symbol no longer
shows.
Check all the warning and tell-
tale lights.
DTC self-diagnosis not
completed
The DTC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed with the en-
gine running for the wheel
sensors to be checked: min
5 km/h)
If an indicator showing a DTC
fault appears after DTC self-dia-
gnosis completes:
You can continue to ride. Bear
in mind that the DTC function
is not available or the function-
ality might be subject to certain
restrictions.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Running in
Engine
Until the first running-in check,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Comply with the rpm limits for
running in.
The electronic engine man-
agement system prevents
the engine from revving past the
preset rpm limit for running in.
The authorised BMW Motorrad
dealer deactivates this monit-
oring function when the motor-
cycle is brought in for its initial
inspection.
6
85
z Riding
ProCarManuals.com