BMW Motorrad S 1000 R Page 122 Rider'S Manual Download

Page: 122 / 172

Remove screw

and remove

the wheel-speed sensor from
its bore.
Mask off the parts of the wheel
rim that could be scratched in
the process of removing the
brake calipers.

Once the calipers have
been removed, there is

a risk of the brake pads being
pressed together to the extent
that they cannot be slipped back
over the brake disc on reas-
sembly.
Do not operate the handbrake
lever when the brake calipers
have been removed.

Remove screws

of the brake

calipers on left and right.

Force the brake pads

slightly

apart by rotational movement
of the brake caliper

against

brake disc

Carefully pull the brake calipers
back and out until clear of the
brake discs.

Lift the motorcycle, preferably
with a BMW Motorrad rear-
wheel stand.
Install the rear-wheel stand
(

103).

Lift the front of the motorcycle
until the front wheel is clear of
the ground, preferably using

120

Maintenance

ProCarManuals.com

Summary of Contents for S 1000 R













































































































































































Search results

Summary of Contents for S 1000 R

Reviews:

Related manuals for S 1000 R

Brands by name

Popular brands

BMW Motorrad S 1000 R, Rider'S Manual

Search results

Summary of Contents for S 1000 R

Reviews:

Related manuals for S 1000 R

Brands by name

Popular brands