BMW Motorrad S 1000 R 2020, Rider'S Manual

Page: 98 / 286

92 TFT DISPLAY
pairing process is conducted
only once, on initial contact.
On some mobile devices,
e.g. with operating sys-
tem iOS, the BMW Motorrad
Connected App must be called
up before using.
During the pairing process, the
TFT display searches for other
Bluetooth-compatible devices
within its reception range. The
conditions that have to be sat-
isfied before the audio system
can identify another device are
as follows:
The Bluetooth function of the
device must be enabled
The device must be "visible"
to others
The device must support the
A2DP profile
Other Bluetooth-capable de-
vices must be switched off
(e.g. mobile phones and navi-
gation systems).
Please consult the operating
instructions for your communi-
cation system.
Pairing
Call up menu
Settings
,
Connections
.
Bluetooth connections can
be established, managed, and
deleted in the
CONNECTIONS
menu. The following Blue-
tooth connections are dis-
played:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mo-
bile end devices is displayed.
Connecting a mobile end
device
Pairing ( 92).
Activate the Bluetooth func-
tion of the mobile end device
(see operating instructions for
the mobile end device).
Select
Mobile device
and
confirm.
Select
Pair new mobile
device
and confirm.
Mobile end devices are
searched for.
During the pairing, the
Bluetooth symbol flashes
in the lower status line.
Visible mobile end devices are
displayed.
Select the mobile end device
and confirm.
Observe the instructions for
the mobile end device.
Confirm that the codes match.
The connection is established
and the connection status is
updated.
If the connection cannot be
established, the troubleshoot-
ing chart in the Technical data