BMW Motorrad S 1000 R 2020 Rider'S Manual Download Page 94

Page: 94 / 286

TFT DISPLAY

Consumption 1

(aver-

age)

Consumption 2

(aver-

age)

Riding time 1

Riding time 2

Break 1

Break 2

Speed 1

(average)

Speed 2

(average)

Tire pressure

Fuel tank level

Range

Selecting content of upper

status line

Go to the

Settings

Display

Status line

content

menu.

Turn on desired displays.

It is possible to change be-

tween the selected displays

in the upper status line. If no

displays are selected, only the

range is shown.

Making settings

Select desired settings menu

and confirm.

Turn Multi-Controller

down

until the desired setting is

marked.

If operating instructions are

present, tilt Multi-Controller

to the right.

If no operating instructions

are present, tilt Multi-Con-

troller

to the left.

The setting is saved.

Turning Speed Limit Info on

or off

Requirement

The vehicle is connected to

a compatible mobile end de-

vice. The BMW Motorrad Con-

nected app is installed on the

mobile end device.

Speed Limit Info

displays

the currently permitted max-

imum speed insofar as this

information is provided by the

editor of the maps in the navi-

gation system.

Summary of Contents for S 1000 R 2020































































































































































































































































































Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands

BMW Motorrad S 1000 R 2020, Rider'S Manual

Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands