BMW Motorrad S 1000 R 2020 Rider'S Manual Download Page 69

Page: 69 / 286

ROAD and DYNAMIC riding

modes. In the DYNAMIC PRO

riding mode, the most re-

cently selected DTC status is

retained after turning on the

ignition again.

If the DTC indicator light

lights up after switching

the ignition off and on and

then continuing to ride at the

following minimum speed, a

DTC fault has occurred.
min 3 mph (min 5 km/h)

More detailed information on

the Dynamic Traction Control

can be found in the Technol-

ogy in detail (

159) chapter.

ELECTRONIC CHASSIS AND

SUSPENSION ADJUSTMENT

(DDC)

with Dynamic Damping Con-

trol (DDC)

Dynamic Damping Control

adjustment options

Dynamic Damping Control

(DDC) automatically adjusts the

suspension to the conditions of

the ground surface.

For more information on

Dynamic Damping Control

(DDC), see Chapter "Technol-

ogy in detail" (

161).

Displaying chassis and

suspension adjustment

Switching on the ignition

(

54).

Press button

briefly to

display current setting.

The chassis and suspension

adjustment options for damp-

ing

and load

are displayed.

The display automatically dis-

appears again after a short

time.

Summary of Contents for S 1000 R 2020































































































































































































































































































Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands

BMW Motorrad S 1000 R 2020, Rider'S Manual

Search results

Summary of Contents for S 1000 R 2020

Reviews:

Related manuals for S 1000 R 2020

Brands by name

Popular brands