BMW Motorrad S 1000 R 2020, Rider'S Manual

Page: 145 / 286

139
LAPTIMER
Start time recording
Go to the
Sport
menu and
switch to the Sport 2 or
Sport 3 display.
Start engine.
Press button 1 .
The time recording is running.
Each time when riding over
the Start/Finish line, press
button 1 again to start the
recording for the next racing
lap.
The data of the preceding
race lap will be saved.
The time for the current lap
restarts at
00:00:00
.
The stopped time of a racing
lap is displayed for a config-
urable
Disp. duration
be-
fore the system switches to
the current time for the cur-
rent racing lap.
If the display mode is exited
during a recording, then the
recording continues to run.
Ending time recording and
managing times
Requirement
The Sport 2 or Sport 3 display
is shown.
Press MENU rocker button
down.
The
LAPTIMER
menu is dis-
played.
Stop recording
can be
used to end a recording that
is currently in progress.
Laps
can be used to go to
the current lap times and
riding data. 99 laps can be
saved. If you do not delete
any laps after reaching the
maximum, any further laps
will overwrite the first laps.
Delete all laps
can be
used to delete all laps.
Reset Best Ever
can be
used to reset the best ever
racing lap (
Best Ever
).
Adjusting the Laptimer
Go to the
Settings
,
Vehi-
cle settings
,
Laptimer
menu. The following settings
are available:
Debounce time
: If the head-
light flasher was operated, the
headlight flasher can be op-
erated again within this time
without affecting the lap time
measurement.