BMW Motorrad R nineT, Rider'S Manual, Page: 118 / 192

Replacing LED tail light
The LED tail light can only be
completely replaced.
For details please contact
a specialist service facility,
preferably an authorized
BMW Motorrad Retailer.
Jump-starting
ATTENTION
Current too high when jump-
starting the motorcycle
Cable fire or damage to the mo-
torcycle electronics
Do not jump-start the motor-
cycle using the power socket,
only via the battery terminal.
ATTENTION
Contact between crocodile
clips of jump leads and mo-
torcycle
Danger of short circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
higher than 12 V
Damage to the motorcycle's
electronics
The battery of the donor mo-
torcycle must have a voltage of
12 V.
Park motorcycle, ensuring that
support surface is firm and
level.
Remove passenger seat
(
56).
Remove rider's seat ( 56).
Unclip cover panel 1 at bottom
( arrow ) and lift off.
Begin by connecting one end
of the red jumper cable to the
auxiliary terminal for jump start-
ing
1 on the discharged battery
and the other end to the posi-
8
116
z Maintenance