BMW Motorrad R nineT Urban G S, Rider'S Manual, Page: 105 / 163

Risk of short-circuit and fire
Never attempt to jumper a
blown fuse.
Always replace a defective fuse
with a new fuse of the same
amperage.
Switch off the ignition.
Place the motorcycle on its
stand on firm, even ground.
Removing seat (
49).
Press the hook 1 .
The fuse box is unlocked and
can be pulled to the left and
loosened from the bracket
2 .
Pull the fuse box out of the
bracket
2 .
Press the lock 4 on both sides
and remove the cap 3 .
NOTICE
If fuse defects recur frequently
have the electric circuits checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Consult the fuse assignment
diagram below and replace the
defective fuse.
Fuse assignment (
103)
Reinstall the cap 3 . Make sure
that the lock 4 has engaged.
Push the fuse box into the
bracket
2 until the hook 1 en-
gages.
Installing the seat (
49).
Fuse assignment
Fuse 1
10 A (Instrument cluster, alarm
system DWA, ignition switch,
OBD diagnostic socket, cut-off
relay coil)
8
103
z Maintenance