Disconnect the jump lead from
the ground support point
2
first
and then disconnect it from
the positive battery connection
point
1
.
Battery
Maintenance instructions
Correct upkeep, recharging and
storage will prolong the life of
the battery and are essential if
warranty claims are to be con-
sidered.
Compliance with the points be-
low is important in order to max-
imise battery life:
Keep the surface of the battery
clean and dry.
Do not open the battery.
Do not top up with water.
Follow the loading instructions
on the following pages.
Do not turn the battery upside
down.
ATTENTION
On-board electronics (e.g.
clock) draining connected
battery
Battery is deep-discharged; this
voids the guarantee
Connect a float charger to the
battery if the motorcycle is to
remain out of use for more
than four weeks.
NOTICE
BMW Motorrad has developed a
float charger specially designed
for compatibility with the elec-
tronics of your motorcycle. Us-
ing this charger, you can keep
the battery charged during long
periods of disuse, without having
to disconnect the battery from
the motorcycle's on-board sys-
tems. You can obtain additional
information from your authorised
BMW Motorrad dealer.
Recharging connected
battery
ATTENTION
Unsuitable chargers connec-
ted to a socket
Damage to charger and vehicle
electronics
Use suitable BMW chargers.
The suitable charger is
available from your authorised
BMW Motorrad dealer.
Disconnect any devices that
are connected to the socket.
Comply with the operating in-
structions of the charger.
Using the socket, charge the
battery that is connected to the
vehicle.
NOTICE
The motorcycle's on-board elec-
tronics know when the battery
is fully charged. The on-board
8
101
z
Maintenance
Summary of Contents for R nineT Urban G S
