BMW Motorrad R nineT Urban G S, Rider'S Manual, Page: 65 / 163

ASC self-diagnosis
completed
The ASC telltale and warning
light goes out.
Check all the telltale and warn-
ing lights.
ASC self-diagnosis not
completed
The ASC function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
sensors to be checked: min
5 km/h)
If an indicator showing an ASC
fault appears when ASC self-
diagnosis completes:
You can continue to ride. Bear
in mind that the ASC function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Running in
Engine
Until the running-in check,
vary the throttle opening and
engine-speed range frequently;
avoid riding at constant engine
rpm for prolonged periods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads.
Be aware of the loads when
running in the vehicle.
Load condition during
run in
No full load (Odometer reading
0...1000 km)
Be aware of the running-in
speeds.
Entry speeds
0...1000 km
max 50 km/h (1st gear)
max 70 km/h (2nd gear)
max 90 km/h (3rd gear)
max 110 km/h (4th gear)
max 125 km/h (5th gear)
max 140 km/h (6th gear)
Note the mileage after which
the running-in check should be
carried out.
Mileage until the first
running-in check
500...1200 km
Brake pads
New brake pads have to be run
in before they can achieve their
optimum frictional force. You can
compensate for this initial reduc-
tion in braking efficiency by ex-
6
63
z Riding