BMW Motorrad R nineT Urban G S Page 40 Rider'S Manual Download

Page: 40 / 163

Ignition can be switched off.
To switch off the hazard warn-
ing flashers, switch on the igni-
tion and press button

again.

Turn indicators

Operating the turn
indicators

Switching on ignition (

34).

Push button

to the left to

switch on the left turn indicat-
ors.
Push button

to the right to

switch on the right turn indicat-
ors.

Press button

to switch off

the flashing turn indicators.

Turn indicator cancella-
tion

The turn indicators are can-
celled automatically after the
defined riding time and dis-
tance. The defined time and
distance can be set by an
authorised BMW Motorrad
dealer.

Operation

Summary of Contents for R nineT Urban G S




































































































































































Search results

Summary of Contents for R nineT Urban G S

Reviews:

Related manuals for R nineT Urban G S

Brands by name

Popular brands

BMW Motorrad R nineT Urban G S, Rider'S Manual

Search results

Summary of Contents for R nineT Urban G S

Reviews:

Related manuals for R nineT Urban G S

Brands by name

Popular brands