BMW Motorrad R nineT/5, Rider'S Manual, Page: 54 / 183

ABS indicator and warn-
ing light goes out; if self-
diagnosis has not completed, it
starts flashing.
You also have the option of
switching the ignition off and
then on again.
If the ABS indicator and
warning light remains
on even though the vehicle
has accelerated past the min-
imum speed after the ignition
was switched off and then on
again, an ABS fault has oc-
curred.
min 10 km/h
Automatic Stability
Control (ASC)
Switching off ASC
Switch on the ignition ( 38).
NOTICE
You have the option of deactiv-
ating the ASC function while the
motorcycle is on the move.
Press and hold down button 1
until ASC indicator and warning
light
2 changes its status.
The ABS setting remains un-
changed.
ASC indicator and warning
light starts to show.
Release button 1 within two
seconds.
ASC indicator and warning
light remains on.
ASC is switched off.
Switching on ASC
Press and hold down button 1
until ASC indicator and warning
light
2 changes its status.
ASC indicator and warn-
ing light goes out; if self-
diagnosis has not completed, it
starts flashing.
Release button 1 within two
seconds.
4
52
z Operation