BMW Motorrad R nineT/5, Rider'S Manual, Page: 106 / 183

Working from the inboard side,
insert the glass into the light
housing and close the housing.
Install screw 1 .
Replacing LED rear light
If the LEDs in the rear light fail,
the rear light must be replaced.
Under these circumstances:
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Jump-starting
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running
Electric shock
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Excessive current flowing
when the motorcycle is
jump-started
Wiring smoulders/ignites or dam-
age to the on-board electronics
If the motorcycle has to be
jump-started connect the leads
to the battery terminals; never
attempt to jump-start the en-
gine by connecting leads to the
on-board socket.
ATTENTION
Contact between crocodile
clips of jump leads and
vehicle
Risk of short-circuit
Use jump leads fitted with fully
insulated crocodile clips at both
ends.
ATTENTION
Jump-starting with a voltage
greater than 12 V
Damage to the on-board elec-
tronics
8
104
z Maintenance