BMW Motorrad R 18 Page 87 Rider'S Manual Download

Page: 87 / 158

FAIRING BRACKET

Removing fairing bracket, left

Removing side trim panel (

82).

Remove screws

from the left fairing sup-

port

Loosen the left-side fairing support

from

nozzles

and remove.

Installing fairing bracket, left

Insert the left-side fairing support

nozzles

Install screws

in the left fairing sup-

port

Support for side cover on frame

Thread-locking compound: micro-encap-

sulated
1 lb/ft (2 Nm)

Installing side trim panel (

82).

Removing fairing bracket, right

Removing side trim panel (

82).

Remove screws

from the right fairing

support

Loosen the right fairing support

from

the nozzle

and remove.

Installing fairing bracket, right

Insert right fairing support

into the noz-

zle

Install screws

in the right fairing sup-

port

Support for side cover on frame

Thread-locking compound: micro-encap-

sulated
1 lb/ft (2 Nm)

Installing side trim panel (

82).

Summary of Contents for R 18































































































































































Search results

Summary of Contents for R 18

Reviews:

Related manuals for R 18

Brands by name

Popular brands

BMW Motorrad R 18, Rider'S Manual

Search results

Summary of Contents for R 18

Reviews:

Related manuals for R 18

Brands by name

Popular brands