BMW Motorrad R 18, Rider'S Manual, Page: 69 / 158

65
ABS self-diagnosis not completed
ABS is not available, as the self-diagnosis
routine was not completed. (The motor-
cycle must reach a specified minimum
speed before the system can check oper-
ation of the wheel speed sensors: 3 mph
(5 km/h))
If an ABS error is displayed after the ABS
self-diagnosis is completed:
You may continue driving. Bear in mind
that neither the ABS function nor the inte-
gral function is available.
Have the malfunction corrected as soon as
possible at a specialist workshop, prefer-
ably an authorized BMW Motorrad retailer.
ASC self-diagnosis
The self-diagnosis routine checks whether
the BMW Motorrad ASC is ready for oper-
ation. The self-diagnosis routine runs auto-
matically when you switch on the ignition.
Phase 1
Check of system components monitored
by the diagnostic system while the vehicle
is at a standstill.
ASC indicator and warning light
flashes.
Phase 2
Check of the diagnosable system compo-
nents while driving.
ASC indicator and warning light
flashes.
ASC self-diagnosis completed
The ASC indicator and warning light goes
out.
Check the display of all indicator and
warning lights.
ASC self-diagnosis not completed
ASC is not available because the self-di-
agnosis routine was not completed. (The
motorcycle must reach a specified mini-
mum speed before the system can check
operation of the wheel speed sensors:
min 3 mph (min 5 km/h))
If an ASC error is displayed after the ASC
self-diagnosis is completed:
You may continue driving. Note that the
ASC function and the dynamic engine
brake control are not available.
Have the malfunction corrected as soon as
possible at a specialist workshop, prefer-
ably an authorized BMW Motorrad retailer.
BREAKING-IN
Engine
In the period preceding the break-in
service, drive in frequently changing
engine load and engine speed ranges,
avoiding extended periods at constant
rpm.
Choose curvy, slightly hilly sections of road
if possible.
Observe the load condition during break
in.
Load condition when breaking in
No full throttle (Odometer reading max.
1000 km)
Observe engine run-in speed.
Engine run-in speed
max 4000 min
-1
(Odometer reading max.
1000 km)
Observe mileage, after which the running-
in check should be performed.
Carrying out the running-in check
311...746 miles (500...1200 km)