BMW Motorrad R 18, Rider'S Manual

Page: 48 / 158

44 OPERATION
If you want to complete the configuration,
press button 1 repeatedly until
SET DISPLAY EXIT
is displayed.
Press and hold button 2 to exit
SET DISPLAY
.
SET UNIT ENTER
will be shown.
If you would like to reset the displays to
the factory setting, press button 1 repeat-
edly until
SET DISPLAY RESET
is shown.
Press and hold button 2 until the
RESET
display 3 flashes.
Displays have been reset to the factory
setting.
The display
SET DISPLAY EXIT
will be
shown.
Press and hold button 2 to exit
SET DISPLAY
.
SET UNIT ENTER
will be shown.
ANTI-THEFT ALARM SYSTEM (DWA)
with anti-theft alarm system (DWA) OE
Activating the DWA
Switching on ignition ( 33).
Setting the DWA ( 45).
Switch off the ignition.
If the DWA is activated, the DWA is au-
tomatically activated after the ignition is
switched off.
Activation takes approximately 30 seconds
to complete.
Turn indicators are illuminated twice.
Confirmation tone sounds twice (if pro-
grammed).
DWA is armed.
Switch off the ignition.
Press button 1 on the radio-operated key
twice.
Activation takes approximately 30 seconds
to complete.
Turn indicators are illuminated twice.
Confirmation tone sounds twice (if pro-
grammed).
Alarm system is active.
To deactivate the movement sensor (for
example if you are about to transport the
motorcycle on a train and the swaying
movement of the moving train could trip
the alarm signal), press button 1 on the
radio-operated key during the activation
phase.
Turn indicators are illuminated three times.
Confirmation tone sounds three times (if
programmed).
Movement sensor is deactivated.