BMW Motorrad R 18, Rider'S Manual, Page: 47 / 158

43
Briefly press button 1 in each case to se-
lect the parameters in
SET UNIT
:
Change fuel consumption display indicator
to
L/100
,
MPG
or
KM/L
Change temperature display unit to
°C
or
°F
Change time display to
24H
or
12H
Change date format to
DMY
or
MDY
Briefly press button 2 until each desired
unit 3 is set.
If you want to complete the configuration,
press button 1 repeatedly until
SET UNIT EXIT
is displayed.
Press and hold button 2 to exit
SET UNIT
.
SETUP RESET
is displayed.
If you want to reset the units to the fac-
tory setting, press button 1 repeatedly un-
til
SET UNIT RESET
is shown.
Press and hold button 2 until the
RESET
display 3 flashes.
Units have been reset to factory settings.
The display
SET UNIT EXIT
will be shown.
Press and hold button 2 to exit
SET UNIT
.
SETUP RESET
is displayed.
Configuring displays
Requirement
The vehicle is at a standstill.
Switching on ignition ( 33).
Select SETUP ( 40).
Briefly press button 1 repeatedly until
SET DISPLAY ENTER
is displayed.
Press and hold button 2 to activate
SET DISPLAY
.
Press button 2 to deactivate the display
OFF
or to activate the display
ON
.
Press button 1 to select the display 3 .
The following displays can be deactivated:
Trip distance
Automatic trip distance
Engine temperature
Average speed
Vehicle voltage
Date
Average consumption
Current consumption
Clock
Rotational speed (RPM)