BMW Motorrad R 18, Rider'S Manual, Page: 42 / 158

38 OPERATION
MULTIFUNCTION DISPLAY
Selecting the display
Requirement
The vehicle is at a standstill.
Switching on ignition ( 33).
The on-board computer is displayed.
Repeatedly short-press button 1 until de-
sired value is displayed.
Possible displays:
Total mileage:
MI
Trip distance 1:
MI 1
Automatic trip distance:
MI A
is automat-
ically reset if at least 6 hours have passed
since the ignition was switched off and
the date has changed.
Distance covered after reaching the re-
serve volume:
MI R
can only be selected
for the reserve volume.
Engine temperature:
°F
Average speed:
ØMPH
Vehicle voltage:
VOLT
Date:
MM.DD.
Average fuel consumption:
ØMPG
Current consumption:
MPG
during vehicle
standstill:
G/H
Clock:
AM
/
PM
Rotational speed:
RPM
Remaining distance traveled until service:
SERV
can only be selected if service is due
within 600 mi (1000 km) or if service is
overdue.
Service date:
SERV
can only be selected
if service is due within one month, or if
service is overdue.
Active warnings:
WARN
only selectable if
there are warnings that are active.
Go to menu fur settings:
SETUP ENTER
Configuring displays ( 43).