BMW Motorrad R 18 Page 95 Rider'S Manual Download

Page: 95 / 158

ATTENTION

Unintentional pressing together of brake

pads

Component damage when mounting the

brake caliper or when pressing the brake

pads apart

Do not actuate the brakes with the

brake caliper removed.

ATTENTION

Using hard or sharp-edged objects near

the component

Component damage

Do not scratch components, if necessary

tape off or cover.

Mask off areas of wheel rim that could be

scratched in the process of removing the

brake calipers.

Carefully pull the brake calipers back and

outward to remove them from brake discs.

Loosen screw

but

do not remove

Slightly press the quick-release axle with

the screw

for a better grip on the right

side.

Remove the screw

Pull out the quick-release axle

while sup-

porting the front wheel.

ATTENTION

Improper removal of the front wheel

Damage to the wheel speed sensor

When rolling out the front wheel, pay

attention to the wheel speed sensor.

Place front wheel down and roll it forward

out of the front suspension.

Remove the spacer bushing

from the

wheel hub.

Summary of Contents for R 18































































































































































Search results

Summary of Contents for R 18

Reviews:

Related manuals for R 18

Brands by name

Popular brands

BMW Motorrad R 18, Rider'S Manual

Search results

Summary of Contents for R 18

Reviews:

Related manuals for R 18

Brands by name

Popular brands