BMW Motorrad R 18, Rider'S Manual

Page: 101 / 158

97
Loosen circlip 1 .
Pull the silencer 4 out of bracket 2 and 3
and take off.
Installing the silencer
The work steps described here for the
right silencer also logically apply to the
left silencer.
Attach the silencer 1 to bracket 2 and 4 .
Slide the silencer 1 onto the exhaust mani-
fold 3 .
Align the circlip with recess 4 to the snap-
in lug and the mark 3 .
Snap-in lug engages in the recess of the
circlip.
Tighten circlip 4 .
Circlip on the silencer and exhaust
manifold
18 lb/ft (24 Nm)
LIGHT SOURCE
Replacing the LED light source
WARNING
Overlooking the vehicle in traffic due to
a defective light source on the vehicle
Safety risk
Replace defective light sources as
quickly as possible. For details please
contact a specialist service facility,
preferably an authorized BMW Motorrad
Retailer.
All light sources on the vehicle are LED light
sources. The service life of the LED light
sources is longer than the assumed service
life of the vehicle. If an LED light source is
faulty, please contact a specialist workshop,
preferably an authorized BMW Motorrad re-
tailer.
JUMP-STARTING
CAUTION
Touching live parts of the ignition sys-
tem when the engine is running
Electrocution
Do not touch parts of the ignition sys-
tem when the engine is running.