BMW Motorrad R 1250 GS 2020, Rider'S Manual

Page: 113 / 294

107
Remove screw 1 and remove
cover 2 .
Loosen adjusting screw 3 and
turn mirror arm 4 into the de-
sired position.
Tighten adjusting screw 3 ,
holding the mirror arm while
doing so.
Affix cover 2 and install
screw 1 .
Mirror on handlebars
18 lb/ft (25 Nm)
with hand protection OE
18 lb/ft (25 Nm)
HEADLIGHT
Headlamp range and spring
preload
The headlamp range gener-
ally remains constant due to
the adjustment of the spring
preload to the loading state.
Spring preload adjustment
may only be insufficient when
the motorcycle is very heavily
loaded. In this case, the head-
lamp range must be adjusted
to the weight.
If there are doubts as
to the correct headlight
range, have the adjustment
checked by a specialized work-
shop, preferably by an autho-
rized BMW Motorrad retailer.
Adjusting the headlight beam
throw
Requirement
When the spring preload ad-
justment is no longer able to
maintain the correct beam
height to avoid dazzling on-
coming traffic owing to high
vehicle payloads.
Adjust the headlight beam
throw at adjustment screw 1 .