BMW Motorrad R 1250 GS 2002, Rider'S Manual, Page: 93 / 338

87
ANTI-THEFT ALARM (DWA)
Activation
with anti-theft alarm (DWA) OE
Switch on the ignition ( 60).
Customising anti-theft alarm
settings ( 89).
Switch off the ignition.
If the alarm system is activ-
ated, then the alarm system
will be automatically activated
when the ignition is switched
off.
Activation takes approximately
30 seconds to complete.
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.
with Keyless Ride OE
Switch off the ignition.
Press button 1 on the radio-
operated key twice.
Activation takes approximately
30 seconds to complete.
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.
To deactivate the motion
sensor (for example if you are
about to transport the motor-
cycle on a train and the sway-
ing movement of the mov-
ing train could trip the alarm),
press button 1 on the radio-
operated key again during the
activation phase.
Turn indicators flash three
times.
Confirmation tone sounds
three times (if programmed).
Motion sensor has been
deactivated.
Alarm signal
with anti-theft alarm (DWA) OE
A DWA alarm can be triggered
by:
Motion sensor
Switch-on attempt with an
unauthorised vehicle key.
Disconnection of the DWA
anti-theft alarm from the mo-
torcycle's battery (DWA in-
ternal battery in the anti-theft