BMW Motorrad R 1200R 2014, Rider'S Manual

Page: 81 / 231

Repeatedly press button 1 until
desired heating stage 2 ap-
pears on the display.
The handlebar grips have two-
stage heating.
First heating stage
50 % heating power
Second heating stage
100 % heating power
The second heating stage is
for heating the grips quickly:
subsequently one should
switch back to the first stage.
The selected heating stage will
be saved if you allow a certain
length of time to pass without
making further changes.
To switch off the heated
handlebar grips, press button
1
until heated handlebar grip
symbol
2 disappears.
Front and rear seats
Removing rear seat
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Press down on the front part
of rear seat
2 and at the same
time turn seat lock
1
to the left
with the vehicle key and hold it
in this position.
Lift rear seat
2 at the front and
release the vehicle key.
Remove rear seat
2 and place
it, upholstered side down, on a
clean surface.
Installing rear seat
Begin by slipping rear seat 1
into the mounts at the back.
Press down firmly on rear
seat
1 at the front.
The rear seat engages with an
audible click.
4
79
z Operation