BMW Motorrad R 1200GS Adventure 2016, Rider'S Manual

Page: 62 / 219

the 1 button until the ABS
indicator light reacts. In this
case, the ASC setting does not
change.
ABS indicator light lights
up.
Release button 1 within two
seconds.
ABS indicator light contin-
ues to be lit up.
ABS function is deactivated,
integral function continues to
be active.
Switch on ABS function
Press and hold the 1 button
until the ABS indicator light
changes its display behavior.
ABS indicator light goes
out, and starts to flash if
self-diagnosis has not been com-
pleted.
Release button 1 within two
seconds.
ABS indicator light remains
off or continues to flash.
The ABS function is switched
on.
As an alternative, the ignition
can also be switched off and
then on again.
NOTICE
If the ABS indicator light lights
up after switching the ignition off
and on and then continuing to
ride at more than 3 mph (5 km/
h), an ABS fault has occurred.
NOTICE
More detailed information on
BMW Motorrad Integral ABS
braking systems can be found
in the section "Technology in
detail".
Automatic Stability
Control (ASC)
Deactivating ASC function
Switch on ignition ( 44).
4
60
z Operation
ProCarManuals.com