BMW Motorrad R 1200GS Adventure 2016, Rider'S Manual

Page: 127 / 219

Affect of wheel sizes
on suspension control
systems
The wheel sizes play a major role
for the ABS and ASC suspension
control systems. The diameter
and width of the wheels stored
in the control unit have particular
significance as the basis for all
necessary calculations. A change
in these sizes resulting from con-
version to wheels not installed
as standard equipment can seri-
ously affect the control efficiency
of these systems.
The sensor rings required for
wheel speed detection must also
match the installed control sys-
tems and may not be replaced.
If you want to equip your
motorcycle with different wheels,
please contact a specialist
service facility, preferably a
BMW Motorrad retailer. In some
cases the data stored in the
control units can be adapted for
the new wheel sizes.
TPC/RDC sticker
with Tire Pressure Control
(TPC/RDC)
OE
ATTENTION
Improper tire removal
Damage to the TPC/RDC sen-
sors
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the TPC/
RDC sensor. During a tire
change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
authorized workshop of the TPC/
RDC sensor.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
8
125
z Maintenance
ProCarManuals.com