manualshive.com logo in svg

BMW Motorrad KW074-DAMS99, Translation Of The Original Operating Instructions, Page: 30 / 93

Share
Download
BMW Motorrad KW074-DAMS99 Translation Of The Original Operating Instructions Download Page 30

Description

877-00113_1.2_06.08.2018

28

Maximum speed levels

When the rider steps on the pedal, the motor is 
activated until the speed set by the rider has been 
reached. Six speed levels are available.

Function display 

The function display shows different information and 
functions:

• Journey information,

•

System messages

 and

•

System functions

.

System functions

The journey information, the Bluetooth connection and 
the PIN input are changed on the display control panel. 
The desired functions are called up using the joystick.

Screen

Function

RESET

Resets the TOUR data to zero

AUS

SMARTPHONE

Sets the Bluetooth connection

AUS

PIN AKTIV

Manages the PIN to prevent 

unauthorised use of the e-

scooter

Table 14:

System functions

EN_877-00113_1.2__BMW E_Scooter_Marquardt_Inhalt.book  Page 28  Monday, August 6, 2018  11:26 AM

Summary of Contents for KW074-DAMS99






























































































Reviews:

No comments