BMW Motorrad K 1600GTL, Rider'S Manual, Page: 58 / 315

Switching automatic Hill Start
Control Pro on and off (
92).
Hill Start Control Pro
cannot be activated
Yellow holding symbol is
displayed.
Possible cause:
Hill Start Control Pro cannot be
activated.
Fold in side stand.
Hill Start Control Pro only
works when the side stand is
folded in.
Start the engine.
Hill Start Control Pro only
works when the engine is
running.
Hill Start Control Pro
automatically deactivated
General warning light
flashes yellow.
The holding symbol flashes
briefly.
Possible cause:
Hill Start Control Pro has been
automatically deactivated.
Side stand has been folded
out.
Hill Start Control Pro is deac-
tivated when the side stand is
folded out.
Engine has been switched off.
Hill Start Control Pro is de-
activated when the engine is
switched off.
The motorcycle was ridden
off with Hill Start Control Pro
activated.
Operate Hill Start Control Pro
(
91).
The temperature of the
brakes is too high
General warning light lights
up yellow.
The symbol for brake tem-
perature is displayed.
DANGER
Riding with overheated
brakes
Risk of accident due to failure of
brakes
Adapt your riding style accord-
ingly.
Avoid frequent braking by using
the engine brake.
WARNING
Failure to observe service
intervals
Risk of accident
Observe the valid service inter-
vals for brakes.
Service-due indicator
If a service is due, for a
brief period after the Pre-
Ride-Check the service symbol
3
56
z Status indicators